 |
| |
|
|
G-Light:
First Portable LED Light!
 G-Light’s newly designed LED module and it’s unique light intensity technology provide you with a powerful and reliable light source.
GC’s G-Light offers superior light curing, easy and economical operation to decrease chair time and cut operating expenses.
|
|
Features & Benefits:
- Extremely High Power Output - Almost twice
as powerful as the leading LED light1.
- Achieved Greater Depth of Cure Than the Leading Halogen Light1.
- Cures All Photo-Initiated Dental Materials - In half the time of halogen lights, regardless of shade1.
- Easy One-Touch Timer Setting
- Quiet Operation
- Simple To Change Lithium Ion Battery
- 360º Rotating Optic Light Guide (autoclavable)
to reach all locations.
- Rugged Construction
More About G-Light
Back to Top of Page
1 Data on file.
|
 |
| |
|
|
GC FujiCEM Automix
Delivering faster, easier results in a whole new way.GC FujiCEM Automix delivers a consistent mix directly
into the restoration - faster and easier than mixing by
hand. No mixing, no mess... NIX the MIX
Common applications:
- Indirect restorations
- Metal, porcelain fused to metal (PFM)
and resin crowns, bridges, inlays and onlays
- Porcelain inlays
More About GC FujiCEM Automix
Back to Top of Page
|
|
|
 |
| |
|
|
GC G-BOND
Introducing Advanced Seventh Generation Bonding
Fast, Easy Application
Etch, desensitize, prime, bond - all with one component G-Bond. One coat, blast, and one cure – in as little as 18 seconds.
| |
|
| G-Bond’s thin, dense interface with dentin (less than 300 nanometers) |
G-Bond’s Nano
Interaction Zone (NIZ) |
|
|
 No Guesswork, Simple Technique
New G-Bond takes the guesswork out of bonding. It’s not technique sensitive like other “all in one” bonding systems so you don’t need to worry about “how dry” or “how wet” or how “over-etched” or how “under-etched” the tooth surface is. G-Bond gives you clinically successful results time after time. And because open dentin tubules are never exposed, there’s little chance of sensitivity.
High Bond Strength
Dry, moist or wet, dentin or enamel, G-Bond produces a strong, reliable bond.2 Its advanced 4-MET and Phosphoric Acid Ester Monomer Adhesive Technology combined with nanofilled particles form a unique nanofilled interface with the dentin - a “Nano Interaction Zone” (NIZ). This “nano” level reaction produces insoluble calcium compound for a better bond less likely to deteriorate from enzymes contained in the mouth.
The ONE and ONLY ONE
Try NEW easy-to-use G-BOND. Save time, prevent sensitivity and get a reliable bond for your composite restorations. Call your dealer or 1-800-323-7063 for more information.
|
 |
| |
|
|
G-Cem
Setting a new standard in self-adhesive cement technology
From GC America, the world’s leading dental
cement company, comes the latest innovation in universal
resin luting cement: G-Cem™. Easy to use, with a fast,
one-step application process. Reliably strong, with a high
bond strength to enamel and dentin. Completely versatile,
for use with all crowns, bridges, inlays, onlays and
endodontic posts.
|
|
 Features & Benefits:
- Unparalleled ease of use
- High bond strength
- No risk of post-op sensitivity
- Dual-cure chemistry
- Less technique sensitivity than other resin cements
- High esthetic quality
- Maximum fluoride release
More About G-Cem
Back to Top of Page
|
 |
| |
|
|
GRADIA
DIRECT
X TM
A New Universal Composite
The X-Filler
GRADIA
DIRECT X incorporates a new nanofiller
which blocks X-rays but not visible light. The result
is improved translucency and chameleon effect ideal
for the most natural looking single shade restorations.
Long-Term Durability
GRADIA
DIRECT X is designed for flexibility and strength,
and is the only product that has the lowest modulus of
elasticity and highest flexural strength.
|
|
GRADIA DIRECT X simplifies your esthetic restorations by
combining smooth handling, durability and high polishability
into a single universal composite.
GRADIA DIRECT X has been designed to provide
excellent wear resistance and feel natural in the mouth
without wearing away opposing enamel.
Why choose GRADIA DIRECT X?
- Excellent wear resistance — and won’t
wear away opposing enamel, either
- Extremely low polymerization shrinkage
stress for reduced post-operative sensitivity
- Activated filler particles
strengthen matrix
for increased fracture toughness
- Smooth handling for easy placement,
sculptable and brushable!
More About GRADIA DIRECT
X
Back to Top of Page
|
 |
| |
|
|
 NATURE-CRYL HI-PLUS
Ultra High Impact Heat-cured Denture Base
Exceeding the requirements of ISO 1567 Type 1 Class 1 denture base material, ultra high impact cadmium-free NATURE-CRYL HI-PLUS offers up to 20 minutes working time.
Computer assisted shade matching assures esthetically accurate upper and lower dentures, partial dentures, relines and repairs across all NATURE-CRYL system shades.
More About NATURE-CRYL HI-PLUS
Back to Top of Page
 
NATURE-CRYL HI-20ET
High Impact Heat-cured Denture Base Resin
NATURE-CRYL HI-20ET high impact denture resin’s innovative polymer chemistry allows extended working time and a 20 minute boiling water cure.
This material complies with the requirements of ISO 1567 Type 1 Class 1 denture base material and exceeds the ISO 1567 threshold for high impact strength. Computer assisted shade matching assures esthetically accurate upper and lower dentures, partial dentures, relines and repairs across all NATURE-CRYL system shades.
More About NATURE-CRYL HI-20ET
Back to Top of Page |
|
 NATURE-CRYL POUR
Self-cured Denture Base and Repair Resin
A pour type acrylic resin, NATURE-CRYL POUR is used to process complete or partial dentures, and it also can be used as a laboratory reline and repair material.
This material complies with the requirements of ISO 1567 Type 2 Class 2 denture base material. Computer assisted shade matching assures esthetically accurate upper and lower dentures, partial dentures, relines and repairs across all NATURE-CRYL system shades.
More About NATURE-CRYL POUR
Back to Top of Page
NATURE-CRYL MC
Microwave Cured Denture Base Resin (Available June 2006)
NATURE-CRYL is a denture acrylic resin specially created for microwave curing. This material complies with the requirements of ISO 1567 Type 5 denture base. High quality precision dentures can be cured in just three minutes in a household microwave oven. Unique plastic flask allows for more economical denture production. Computer assisted shade matching assures esthetically accurate upper and lower dentures, partial dentures, relines and repairs across all NATURE-CRYL system shades
More About NATURE-CRYL MC
Back to Top of Page
|
 |
| |
|
|
GC Initial IQ - One Body
Concept
Press-over-Metal & Press-over-Zircon
This new concept of pre-blended effect
ingots in combination with the 3-dimensional Lustre
Pastes exhibits vitality and a natural glaze in one
bake. This new development is standardized, compact and
easy to use. By using this unique “One Body Concept,”
you are making better use of your time and can now enjoy
the benefits of higher accuracy, fewer remakes and
optimized productivity without sacrificing customer
service or quality. Introduce GC Initial IQ – One Body
Concept in your lab and maximize your existing resources
and get a higher revenue from your dental business.
|
|
 |
| |
More About GC Initial IQ
Back to Top of Page
|
| |
 |
| |
|
|
GC TiON
Revolutionary TITANIUM DIOXIDE
Photocatalyst Formulation
GC TiON is light-cured with any commercially available bleaching light or curing light (VLC). Because GC TiON’s titanium dioxide photocatalyst is almost 5 times more efficient than most of today’s photocatalysts, the bleaching effect of the released oxygen radicals penetrates deeper into the tooth, producing a superior whitening effect. One “In Office” application of GC TiON typically brightens the teeth about 9 shades and takes less than 50 minutes. The GC TiON In Office System really light-cures!
|
|
|
| |
Features & Benefits:
-
Superior Whitening Effectiveness
-
Lower Sensitivity
-
Reduced Chair Time!
-
Light-Cured Gingival Protector
-
Better Handling Whitening Gel
-
And, a GC TiON Take Home System
How It Works
GC TiON Product Module
More About GC TiON
Back to Top of Page
|
| |
|
